(Above) Too much work, too little time

Audio comments on this update.

Gathering the Nitrous Parts

               Audio comments on this update.

Well, it’s been going pretty slow with gathering all the parts needed to build the eXtremeSuper’s Nitrous System. Majority of all my parts thus far have been purchased through EBay from one seller, in particular JJFlash540. This guy sells a ton of NOS equipment at extremely reasonable prices. Check out his auctions at the link above.

(Above ) Nitrous & Fuel Seilenoids with the lines and to the right is the NOS Purge valve kit.
 

The latest addition to my collection of NOS parts was a set of Nitrous and Fuel Lines with all the fittings I need to get things rolling, I thought. These lines were originally from a Honda. Since they were from a Honda, of course the steel feed lines were to short, I figured no big deal, and I just need to lengthen 1/8in lines. Well, not as easy as it sounds.

 

(Above ) Nitrous Lines and selinoid

I need to change out all of the fittings from the Distribution block, then change out the lines, and flare all of the fittings to ensure a good tight seal.

(Above ) Fuel Lines and solenoid

It’s going to be sweet when were done, but it just seems like it’s taking forever!

Finding the fittings for the Nitrous System is not as easy As I thought.

Stay tuned for more updates soon.

Jim – eXtremeSuper


 

_____________________________________

The "Super" at Grobbel Racing's Shop
 

Podcasts    - Subscribe via RSS

AAT's (Audio Assisted Tutorials

SuperBeetle Progress Articles